In my first post I talked a lot about not buying expensive tools especially designed for clay. I stick to that, although there are a couple of tools everyone wants to have after starting working with clay. One of them is the clay extruder. It helps you push out different shapes from clay which you cannot achieve by only rolling it.
Of course there are cheaper and more expensive ones. My experience is that the cheaper one gave me a hard time untill my fiance found a way to solve this issue – it wasn’t easy though.
This is it. You put clay inside the tube, then you place the handler on top of it and push! And unless you are super-powerful, it will be almost impossible to push the clay out.
Obviously, this one would have been a better choice (now I know), but of course this is much more expensive:
Here you have a T handle and you don’t push the clay, but rotate the handle, so you need less effort to push the clay out. It’s much easier.
And finally this is how we worked out to use the cheaper one:
We had this extruder thingy and after some failed tries we finally managed to place the small extruder into the big one, so now I can extrude as much clay as I wish without much effort. 🙂
Now about techniques… Molding is one of the basics. You use your hands, mold the clay to the desired shape and use it. Simple, isn’t it? 🙂 But of course, there are things you cannot mold with your hands.
This was the first technique I tried:
This is really something worth practicing, because you will often use it during more difficult projects. And if you don’t have a pasta machine yet, don’t worry: you can roll the clay with a roller (a bottle, a glass vase etc.) you will just need to be careful to roll it to the same thickness on all parts of it.
And right after that, you can give a try to this one: