Polymer Clay Fun

Requires no comments. Easy and looks cute. 🙂

593f9946db6d2e69a784c13eabf5e071

(source: pinterest)

Advertisements

Ric Rac Rose Ring

Ric-Rac-Rose-Tutorial
– Supplies –

Ric Rac
Hot Glue
Accessory to attach it to

According the tutorial we need two pieces of ric rac at 21 inches. The longer and wider the ric rac is, the taller the flower will be.
1105
Now “braid” the two pieces of Ric Rac together.
1123
Take the end and curl the Ric Rac in.
1133
Continue rolling the Ric Rac. You can put a little hot glue on the sides as you are rolling it.
1142

1152

1173
When you like the size of your rose, you can stop rolling. Put a little glue where you want to end the Ric Rac. Now put some glue on the under side of the rose.
1193
Bring the Ric Rac under the rose and adhere it to the glue. If you have some excess Ric Rac, this is where you will cut it off. Then glue the tails securely under the rose.
1219
To make some petals coming out, pull the edges of the Ric Rac down. Keep pulling the Ric Rac edges down until you like how it looks.
1265
Now you can glue it on a hairpin, a ring-base or a pendant base – whatever you think would look great with a rose on it. 🙂
1304

1319

(source: http://www.theribbonretreat.com/)

Polymer Clay 2. – Some basic tools and techinques to begin with

In my first post I talked a lot about not buying expensive tools especially designed for clay. I stick to that, although there are a couple of tools everyone wants to have after starting working with clay. One of them is the clay extruder. It helps you push out different shapes from clay which you cannot achieve by only rolling it.

Of course there are cheaper and more expensive ones. My experience is that the cheaper one gave me a hard time untill my fiance found a way to solve this issue – it wasn’t easy though.

l_1gIWkmt-clay-extruder-gun-sculpey-clay-craft-tools-set-19-d

This is it. You put clay inside the tube, then you place the handler on top of it and push! And unless you are super-powerful, it will be almost impossible to push the clay out.

Obviously, this one would have been a better choice (now I know), but of course this is much more expensive:

images

Here you have a T handle and you don’t push the clay, but rotate the handle, so you need less effort to push the clay out. It’s much easier.

And finally this is how we worked out to use the cheaper one:

clay-extruders

We had this extruder thingy and after some failed tries we finally managed to place the small extruder into the big one, so now I can extrude as much clay as I wish without much effort. 🙂

The next tool is the pasta machine.
amaco-pasta-roller
There are pieces especially designed for clay, but a simple pasta machine (designed for pasta obviously) does the same trick. I mean it. Really.

Now about techniques… Molding is one of the basics. You use your hands, mold the clay to the desired shape and use it. Simple, isn’t it? 🙂 But of course, there are things you cannot mold with your hands.

This was the first technique I tried:

This is really something worth practicing, because you will often use it during more difficult projects. And if you don’t have a pasta machine yet, don’t worry: you can roll the clay with a roller (a bottle, a glass vase etc.) you will just need to be careful to roll it to the same thickness on all parts of it.

And right after that, you can give a try to this one: